Описание

HFC Series НFC І6З - высокопроизводительное и качественное оборудование компании Airtac. Вся продукция бренда изготавливается на самом современном технологическом оборудовании и сертифицирована по стандарту системы менеджмента качества ISO 9001:2008, что гарантирует ее бесперебойную работу, надежность и длительный срок эксплуатации.Продукция Airtac применяется для различных промышленных сегментов рынка, таких как упаковочная промышленность, медицина, машиностроение, легкая промышленность и другие сферы производства.
1. Cuniform block is adopted in the interior of the air gripper to afford larger gripper force.2. The bumper is adopted in the front of piston, which can reduce the noise of metal bump.3. A positioning hole is attached to the bottom of the body, which can improve the precision and the consistency of repeated dismounting and positioning.4. Precision repeating snatch which adopted roboticized equipment.5. Kinds of series and styles for you to choice which snatch multiform workpiece.1. Due to the abrupt changes, the circuit pressure is low, which will lead to the decrease of the gripping force and falling of the work-pieces. In order to avoid the harm to the human body and damage to the equipment, anti-dropping device must be equipped.2. Don't use the air gripper under strong external force and impact force.3. When install and fix the air gripper, avoid falling down, collision and damage.4. When fixing the gripping jaw parts, don't twist the gripping jaw.5. There are several kinds of installation method, and the locking torgue of fastening screw must be within the prescribed torque range shown in the below chart. If the locking torque is too large, it will cause the dysfunctional. If the locking torque is too small, it will cause the position deviation and fall.''