Описание

  • Electronic-Key adapter with PROFIBUS DP interface
  • read/write system
  • Remote installation
  • Electronic-Key adapter and electronics in one housing
  • Reliable retention of the Electronic-Key, even if there is heavy vibration
  • Transfers the data from the Electronic-Key to a control system for processing
  • Connection to PLC
  • PROFIBUS protocol, cyclic data transfer to control system
  • Interfacing via GSD file
  • Address assignment via DIP switches
  • Version FSA (For Safety Applications)
Dimension drawing Wiring diagram EKS FSA - Selection of safe operation mode with touch panels up to PL e Dimension drawingWiring diagram Technical dataApprovals Mechanical values and environment
Housing material PA6-GF30 gray
Ambient temperature 0 ... 55 °C
Degree of protection IP67 in installed state (only access side)
Mounting cut-out according to DIN 43700 33 x 68 mm
Installation orientation On the front
PROFIBUS DP
Connection Socket Sub-D 9-pin
Electrical connection ratings
LED indicator
Green Operational
Yellow Key in operating distance
Red Fault
Parameters for the outputs LA and LB
Switching voltage 24 ... 30 V
Switching current 1 ... 10 ... 50 mA With short circuit protection max. 100 times
Utilization category according to EN 60947-5-1
AC-15 24V 50mA
AC-12 24V 50mA
DC-12 24V 50mA
Utilization category according to EN 60947-5-2
DC-13 24V 50mA
Connection cross-section 0,14 ... 1,5 mm? Plug-in screw terminals, 2 x 2-pole
Discrepancy time 200 ms Difference time between outputs (LB first)
Power supply
Operating voltage DC 20 ... 24 ... 28 V DC
Current consumption max.150 mA
Connection cross-section 0,14 ... 1,5 mm? Plug-in screw terminal 3-pin
Interface, bus
PROFIBUS DP
Data protocol Profibus DP according to EN50170
Other
Parameters for the outputs LA and LB
Additional feature
max.1 Capacitive load per output in µF
35 Resistance in switched-on state in Ohm
''