Описание

  • With snap-action switching element
  • Plunger material stainless steel
  • Any installation position
Switching elementSnap-action switching contact, 1 changeover contact Single hole fixing limit switches must not be used as an end stop. Dimension drawing Wiring diagram Wiring diagram Dimension drawingWiring diagramWiring diagram Technical dataApprovals Mechanical values and environment
Design Thread M14 x 1
Housing material
Sleeve Brass, nickel-plated
Threaded section Brass, nickel-plated
Ambient temperature -25 ... 80 °C
Degree of protection IP67
Mechanical life 1 x 106
Contact material Silver alloy, gold-plated
Switching principle Snap-action switching contact
Repeat accuracy (absolute) ±0,01 mm
Installation orientation Any
Number of NC contacts 1
Number of NO contacts 1
Connection Plug connector M12
Approach speed 0,01 ... 8 m/min
Actuating element Ball plunger
Actuating force
Approx. 20 N
Electrical connection ratings
Utilization category according to EN 60947-5-1
DC-13 0.6A 24V
AC-12 0.5A 50V
Short circuit protection according to IEC 60269-1 2A gG
Rated insulation voltage Ui 50 V
Rated impulse withstand voltage Uimp 2,5 kV
Switching voltage
min. 12 V
Switching current
Min. at 24V 10 mA
''