Описание

  • 3-stage function
  • Vibration signal
  • + and – buttons
  • 2x selector switch
  • Straight connection cable, 1.5 m
3-stage functionEnabling function is active only in the second stage (middle position, actuating point). If the pushbutton is released or pushed further (panic function), the enabling is removed (dependent on the wiring, see function sequence). Vibration signalThe vibration signal is used for tactile feedback of the enabling position. + and – buttonsThese buttons can be cond individually. For example for moving axes in the positive or negative direction. 2x selector switch (selector switch 4-stage Gray code / selector switch 12-stage Gray code)As required, the adjustable detent positions can, e.g. be used for axis, speed or range selection. CableThe high-quality connection cables are available in a straight version. Dimension drawing Wiring diagram Wiring diagram Wiring diagram Dimension drawingWiring diagramWiring diagramWiring diagram Technical dataApprovals Mechanical values and environment
Material PA, CR, TPE
Weight
Net 1 kg
Ambient temperature -5 ... 60 °C
Degree of protection IP54
Mechanical life 1 x 106
Switching principle Snap-action contact element
Number of changeover contacts 3
Connection Plug connector number of pins 17
Cable length
straight 1,5 m
Electrical connection ratings
Rated conditional short-circuit current 100 A
Utilization category according to EN 60947-5-1
DC-13 24V 1A
24V 0.3A
Short circuit protection according to IEC 60269-1 2A gG
Rated insulation voltage Ui 250 V
Rated impulse withstand voltage Uimp 1,5 kV
Degree of contamination (external, according to EN 60947-1) 3
Connecting cable 23x0.14mm?
Switching characteristics 3-stage enabling switch
Other
Additional feature
Pushbutton + 1
Selector switch 4 positions 1
Pushbutton - 1
Vibration motor 1
Selector switch 12 positions 1
In compliance with 60947-5-8
Reliability values according to EN ISO 13849-1
Enabling switch
B10D 0,1 x 106
''