Описание

  • 3-stage function
  • + and – buttons
  • Hole for lower stop command device
  • Cable gland included
3-stage functionEnabling function is active only in the second stage (middle position, actuating point). If the pushbutton is released or pushed further (panic function), the enabling is removed (dependent on the wiring, see function sequence). + and – buttonsThese buttons can be individually assigned, e.g. to move axes in positive or negative direction. Dimension drawing Wiring diagram Wiring diagram Wiring diagram Dimension drawingWiring diagramWiring diagramWiring diagram Technical dataApprovals Mechanical values and environment
Material PA, CR, TPE
Weight
Net 0,5 kg
Ambient temperature -5 ... 60 °C
Degree of protection IP54
Mechanical life 1 x 106
Switching principle Snap-action contact element
Number of changeover contacts 3
Connection Connection terminals, cable O 5...10mm
Electrical connection ratings
Rated conditional short-circuit current 100 A
Utilization category according to EN 60947-5-1
DC-13 24V 1A
24V 0.3A
Short circuit protection according to IEC 60269-1 2A gG
Rated insulation voltage Ui 250 V
Rated impulse withstand voltage Uimp 1,5 kV
Degree of contamination (external, according to EN 60947-1) 3
Switching characteristics 3-stage enabling switch
Other
Additional feature
Version Blind plug in hole for emergency stop
Pushbutton + 1
Pushbutton - 1
In compliance with 60947-5-8
Reliability values according to EN ISO 13849-1
Enabling switch
B10D 0,1 x 106
''