Описание

  • Locking force of 1000 N
  • Performance Level: Cat. 4 PL e
  • Power to lock principle
The electromechanical safety switch with lock function is distinguished by a high locking force of 1000 N. As a result, only one safety switch with lock function is required in order to fulfill a safety level of category 4 PL e (EN ISO 13849-1). The safety level, as well as reaction time and risk time, remain unchanged when connected in series. Extensive diagnosis functions enhance system availability and simplify installation and maintenance. The unique star handle operating concept is especially well-suited for rotary and sliding doors.
Sensor Type Locking unit
Supply Voltage 20,4...26,4 V DC
Response Time ? 100 ms
Risk time ? 200 ms
Temperature Range 0...60 °C
Storage temperature -10...90 °C
Safety Output OSSD
No. Safety Outputs (OSSDs) 2
PNP Safety Output/Switching Current 250 mA
Number of Signal Outputs 1
PNP signal output switching current 50 mA
Short Circuit Protection yes
Protection Class III
Mechanical Data
Housing Material Plastic
Degree of Protection IP65/IP67/IP69
Connection M12 ? 1, 8-pin
Latching Force, typical 25 / 50 N
Safety-relevant Data
Operating principle RFID
Coding Standard
Performance Level (EN ISO 13849-1) Cat. 4 PL e
PFHD 5,20 ? E-10 1/h
Safety Integrity Level (EN 61508) SIL3
Safety Integrity Level (EN 62061) SILCL3
PDDB (EN 60947-5-3) yes
Locking Device Power to lock principle
Locking Force F, guaranteed 1000 N
General Data
Applicable actuator S2FP200
Function
Series Connection yes
Actuator monitored yes
Mechanical Detent Mechanism yes
Detent Mechanism yes
Auxiliary release yes
''