Мы доставляем оборудование BINDER Group (COMBIMASS / CAMASS / VACOMASS)
по всей России

Только что
На этой неделе
Раньше недели
Дата последнего заказа
Состав заказа
23.06.2021
2000FI004 Mass flow meter Type: COMBIMASS® eco Version with compression fitting, with internal LED‐display, supplied with cable gland (attached to the delivery), IP65, EX‐ version zone 1 (Ex de IIC T4) With Hot tapping unit with a ball valve (DVGW‐version) for easy assembly and disassembly of the flow sensor even under pressure, version with flexible insertion depth, type OEIN‐S With Integrated humidity correction based on gas temperature for waterdamp saturated gases Material of housing: stainless steel Power supply: 18‐36 VDC Output: Analog 4 ‐ 20mA Pulse output: 1 p. per m3 N in dry gases (standard conditions acc. to DIN1343), max. 2 pulses/sec. Calibration: geometry and others acc. application Medium: Digester gas Accuracy: Standard +/‐ 2,5% of reading + 0,02% of FS If length of straight inlet and outlet piping section is realized according to the data written in the data sheet Sensor data: 18 mm sensor, 2‐Pin, Length: 450 mm Sensor material: 1.4571 Limits of use: max. 130°C
Узнать цену
24.05.2021
COMBIMASS® eco Mass flow meter Type: COMBIMASS® eco Version with compression fitting, with internal LED‐display, supplied with cable gland (attached to the delivery), IP65, EX‐ version zone 1 (Ex de IIC T4) With Hot tapping unit with a ball valve (DVGW‐version) for easy assembly and disassembly of the flow sensor even under pressure, version with flexible insertion depth, type OEIN‐S With Integrated humidity correction based on gas temperature for waterdamp saturated gases Material of housing: stainless steel Power supply: 18‐36 VDC Output: Analog 4 ‐ 20mA Pulse output: 1 p. per m3 N in dry gases (standard conditions acc. to DIN1343), max. 2 pulses/sec. Calibration: geometry and others acc. application Medium: Digester gas Accuracy: Standard +/‐ 2,5% of reading + 0,02% of FS If length of straight inlet and outlet piping section is realized according to the data written in the data sheet Sensor data: 18 mm sensor, 2‐Pin, Length: 450 mm Sensor material: 1.4571 Limits of use: max. 130°C
Узнать цену
7.10.2019
C060108 термоанемометрический расходомер Thermisches Gasmassemessgerät als Ersatz für SN C060108 Typ: COMBIMASS® eco Ausführung mit Klemmringverschraubung, ohne integrierte LED Anzeige (optional), mit lose beigelegter Kabelverschraubung IP68 Gehäuse: Edelstahl Hilfsenergie: 18-36 VDC Ausgang: 1x 4-20 mA (isoliert ) aktiv, Bürde < 400 Ohm, 10 Bit Auflösung Impuls 1 Imp pro m3 N im trockenen Gas (Normzustand nach DIN 1343), max. 2 Impulse/s Kalibrierung: Geometrie und Anströmung applikationsgerecht Medium: Biogas Genauigkeit: Standard +/- 2,5% vom MW + 0,02% vom MBEW Bei ausreichend geraden Ein- und Auslaufstrecken gemäß Datenblatt Sensordaten: 18 mm Sensor, 2-Pin, Länge: 200 mm Sensormaterial: 1.4571 Einsatzgrenzen: max. 130°С
Узнать цену
Показано 3